 |
Article-N°. 20.50.0001
Adjustable bridge with ball-bearing
runners, precision carrying arm, hard chrome plated, ø32mm (length up to 1.60m as
required), designed to be fitted on an ADEMCO energy supply bridge. Carrying
arm max. load: 80 kg. Heavier loads possible on demand.
|
 |
Article-N°. 20.50.0004
Sliding
carrier with ball-bearing runners, precision carrying arm, hard chrome plated, ø32mm
(length up to 1.60m as required), designed to be fitted on an ADEMCO energy
supply bridge. Carrying arm max. load: 80kg. Heavier loads possible on demand. |
|
Article-N°. 20.50.0005
Short sliding carrier with ball-bearing runners,
precision carrying arm, hard chrome plated, ø32mm (length up to 1.60m as required), designed
to be fitted on an ADEMCO energy supply bridge. This carrier is only available if a third T-rail has
been mounted to the inside of the energy
supply bridge. Max. load: 80kg. Heavier loads possible on
demand. |
|
Article-N°. 20.50.0006
Fixed
holder with hard chrome plated precision carrying arm, ø32mm
(length up to 1.60m as required), designed to be mounted rigidly on an ADEMCO
energy supply bridge. Carrying arm max. load: 80kg. Heavier loads possible on
demand. |
 |
Artikel-N°. 20.50.0002
Load carrying tray 500x450 mm, white enamel with slide fitting, ready
for mounting on precision carrying arm ø32mm with article 20.50.0001 / 20.50.0004 / 20.50.0005 / 20.50.0006. Adjustable for
height and turn. Fitting for drawer. Max. load: 30kg (Without precision carrying
arm ø32mm).
|
 |
Article-N°. 20.50.0003
As Article N°. 20.50.0002 but complete with drawer in plastic. Measuring
inside 380x380x75mm (Without precision carrying arm ø32mm). |
 |
Article-N°. 20.50.0007
Rust-proof rail with 25/10 profile, 600mm long with slide fitting,
ready for mounting on precision carrying arm ø32mm. Adjustable for
height and turn. For secretion bottles, etc. (Without precision carrying arm ø32mm). |
 |
Article-N°. 20.50.0008
Pump holder, aluminum profile, 32x25mm fitted between
2 height-adjustable guide rails ø25mm
(guide rails 800mm long) with slide fitting. Designed for fitting on precision
carrying arm ø32mm. Adjustable for height and turn. For infusion pumps. Carries load of 2 x 10
kg.
(Without precision carrying arm ø32mm). |
 |
Article-N°. 20.50.0009
Lightweight rust-proof cable lead holder. 25/10 profile,
L=800mm incl. 4 universal hooks, adjustable for height and turn with slide
fitting. Designed for fitting on precision carrying arm ø32mm, to hold and lead cables and feed tubes.
Max. load of 5 kg. (Without precision carrying arm ø32mm). |
 |
Article-N°. 20.50.0010
Infusion
bottle holder Type 2 incl. 2 hooks with quick-change holder fitting for profile
rails 25/10 or 35/8. Height adjustable. Allows easy and quick placing of
infusion bags, etc. Max. load 10kg. |
 |
Article-N°. 20.50.0011
Infusion bottle holder Type 2/2 incl. 2 x 2 hooks
with quick-change holder fitting for profile rails 25/10 or 35/8. Height adjustable.
Allows easy and quick placing of infusion bags, etc. Max. load 10 kg. |
 |
Article-N°. 20.50.0012
Adjustable holder with cable pull and 2 hard-chrome
plated hooks with quick-change fitting for profile rails 25/10 or 35/8. Height
adjustable up to L=1000mm. Quickly and easily attached. Particularly useful
for 2-5 litre fluid bags. Max. load 2 x 5 kg. |
 |
Article-N°. 20.50.0015
Sliding X-ray viewer with light field of approx.
710x420mm, for profile rails 25/10 with cable and plug (230V). Light source by
cold cathode fluorescent lamp (CCFL) 2x36W. |
 |
Article-N°. 20.50.0016
Single
rust-proof hook for profile rails 25/10. Designed for leading cables or tubes. |
|
Article-N°. 20.50.0017
Double rust-proof hook for profile rails 25/10. Designed
to hold infusions bags or tube transport holders. |
|
Article-N°. 20.50.0018
Tube
or cable holder with stainless steel stirrup for profile rails 25/10,
projecting approx. 110-125mm. Designed for large-diameter tubes. |
 |
Article-N°. 20.50.0032
Hook shortly special, rust-proof for profile rails 25/10. Designed
to hold infusions bags or other accessories. |
 |
Article-N°. 20.50.0019
Quick-change holder with adjustable tube ø32mm, L= 400mm for profile rails 25/10 or 35/8.
Max. load 10 kg. |
 |
Article-N°. 20.50.0020
Quick-change holder with adjustable tube ø25mm, L=1000mm for profile rails 25/10 or 35/8.
Designed for infusion pumps, etc. Max. load 10 kg. |
 |
Article-N°. 20.50.0021
Halogen lamp 230/12V, 50W, 48'000 Lux / 0.5m, with
swan-neck, fitting for profile rails 25/10 or 35/8. Complete with cable, plug
and transformer. |
|
Article-N°. 20.50.0029
Screen holder, with flat panel monitor owner
(attaches to LCD's that are VESA® MIS-D 100/75, C
compliant), designed to be fitted on an ADEMCO energy supply bridge (supply without
screen). |
|
Article-N°. 20.50.0030
Screen holder, with flat panel monitor owner
(attaches to LCD's that are VESA® MIS-D 100/75, C
compliant), designed to be fitted on an ADEMCO energy supply bridge (supply without
screen). |
|
Article-N°. 20.50.0031
Adjustable bridge with ball-bearing runners, precision
carrying arm, hard chrome plated, ø32 mm
(length up to 1.60m as required), with flat panel monitor owner (attaches to
LCD's that are VESA® MIS-D 100/75, C
compliant), designed to be fitted on an ADEMCO energy supply bridge. |
 |
Article-N°. only on request
Wall bearing, adjustably running in ball bearings,
with extern. arm and spring arm, with monitor mounting plate for the admission
of a TFT screen. Max. discharge 1.70m. For the assembly at ADMECO energy
supply bridge. Max. stress and size of the TFT screen on request (supply without
screen). |
|
Article-N°. only on request
Microscope
carrying arm, precision construction with special rail (approx. 2m) and
sliding carrier. Steel extension arm for microscope. Specially produced. Information on previous products on request. |
 |
Article-N°. only on request
|
